Understanding science, for all. Home About
Novadette› ⚙ Engineering› Electrical› RC Circuits› Stored Energy
⚙ Electrical

Energy in a Capacitor

A camera flash, a supercapacitor in a bus, the capacitor that keeps a clock running: how much energy does a capacitor hold, and how quickly can it give it away? Solve for the energy, capacitance or voltage, or follow a discharge through a resistor.

ElectronicsCapacitorsEnergy
Inputs
Input examples
Energy stored: click Solve next to the energy, capacitance or voltage. Discharge: the full capacitor is connected across a resistor; see the peak current and power and how long it takes to release a share of the energy. Large capacitors at high voltage are dangerous: never touch the terminals.

Capacitors as Energy Stores

A charged capacitor holds energy in the electric field between its plates. Because the energy grows with the square of the voltage, a small capacitor at high voltage can hold a surprising amount: the 330 V capacitor of a camera flash stores several joules.

Compared with a battery, a capacitor stores little energy, but it can release it extremely quickly: through a small resistor the power can reach kilowatts for a fraction of a millisecond. Supercapacitors hold thousands of farads at a few volts and are used where short, powerful bursts are needed, such as regenerative braking.

×2 voltage×4 energy
energyleaves at twice the rate of voltage
1 Wh= 3600 J
peak powerV² / R

Energy and Voltage

E
Result
Enter the values above

Some Capacitors

E = ½CV²
CapacitorC and VEnergy
Small ceramic100 nF at 5 V1.25 µJ
Power-supply electrolytic1000 µF at 25 V0.31 J
Camera flash120 µF at 330 V6.5 J
Supercapacitor cell3000 F at 2.7 V10.9 kJ (3.0 Wh)

Worked Techniques

Energy Stored

The work done to push the charge onto the plates against the growing voltage.

Example: 
Voltage for an Energy

Doubling the stored energy only takes 41% more voltage.

Example: 1 J in 100 µF: 141 V.
Time to Release Energy

The energy falls with e−2t/RC, twice as fast as the voltage. x is the share released.

Example: flash through 2 Ω: 90% in 276 µs.

Sources & Verification

References
  1. A. R. Hambley, Electrical Engineering: Principles and Applications, 7th ed., Pearson, 2018 — Ch. 3 (Inductance and Capacitance) and Ch. 4 (Transients).